Maryland Professional Mold Services LLC
1325 Waterway Ct
Baltimore, MD 21226
ph: 410-360-7530
fax: 410-360-7530
alt: 410-360-6794
radondud
Services
Investigative and Inspection Services:
Whole House Moisture Assessment: ******************
Prices begin at 450.00Sample report:
http://marylandprofessionalmoldservices.com/Samplereport.pdf
This inspection is used mostly for pre-purchase, pre-listing or health related concerns. With a more challenging real estate market, this inspection can catch many problems before the home is marketed. This inspection covers the whole house, inside and out, and generally takes about 2.5 to 3.5 hours to perform and is compiled with digital photos and a full report with specific recommendations.
This investigation differs significantly from a standard home inspection which focuses on mechanical, structural, electrical and plumbing conditions. A proper moisture investigation includes assessment of the drainage plane and a comprehensive assessment of underlying moisture sources that allow dampness and mold to perpetuate. This includes water penetrations, seepage, leaks, humidity and condensation. Most of the time this inspection will find and determine any mold growth, smell, and the cause of such growth and will include the remediation and/or repair actions.
No samples are taken, but can be added. Our Prices are based on Total Square Footage, Not just finished space. A basement, finished or not finished, can take over an hour to properly assess.
+ requested additional samples:Single Area Investigation: *******************************************
350.00
Sample Report:http://marylandprofessionalmoldservices.com/Samplereport.pdf
These inspections are designed to investigate an area of visible mold or an odor of mold. ( i.e. My basement smells musty, I smell moldy odors in my bedroom). This can include concerns and comments raised during a home inspection.
Many times visible mold or smell of mold can begin with a moisture problem far away from the area, so this investigation can become more far reaching. A report, with photos, and recommendations will be issued and is designed to identify the moisture source of the mold growth and determine, if active, what course of action to
take. No samples are taken, but can be added upon request.
+ requested additional samples:Spot Inspection: ************************************************
295.00
These inspections are designed to follow a home inspection or the discovery of a single spot of visible mold. This can also follow up a remediation or moisture repair. A report, with photos, and recommendations will be issued. The inspection is designed to identify the moisture source of the mold growth and determine, if active, what course of action to take. No samples are taken, but can be added upon request.
+ requested additional samples:Testing and Sampling:
ERMI Sampling 300.00
What Is ERMI?
ERMI is the Environmental Relative Moldiness Index – the combination of EPA research, powerful PCR technology, and a new method to screen homes for mold.
Based on recently published data from EPA researchers and the 2006 HUD American Healthy Home Survey, the test has been developed as a tool to evaluate the potential risk of indoor mold growth and associated health effects.
How Does ERMI Work?
The ERMI test involves the analysis of a single sample of dust from a home. The sample is analyzed using mold-specific quantitative polymerase chain reaction (MSQPCR), a highly specific DNA-based method for quantifying mold species. A simple algorithm is used to calculate a ratio of water damage-related species to common indoor molds and the resulting score is called the Environmental Relative Moldiness Index or ERMI. The ERMI value is typically between -10 and 20.
In order to most effectively use this new tool, the ERMI must
be compared to a national database. Indices were determined using this method for 1,096 homes across the U.S. as part of the 2006 HUD American Healthy Home Survey. Individual indices, ranked from lowest to highest were used to create a national Relative Moldiness Index (RMI) Scale.
How Was ERMI Developed?
In initial studies by the EPA, the concentrations of different mold species in "moldy homes" (homes with visible mold growth or a history of water damage) and "reference homes" (homes with no visible mold) were compared. Based on those results, mold species were selected and grouped into those with higher concentrations in moldy homes (group 1) and those with lower concentrations (group 2). To calculate the ERMI, all concentrations are log-transformed and the sum of group 2 is subtracted from the sum of group 1.
What Are The Advantages of ERMI Testing?
In addition to the simplicity of taking only one sample, the ERMI offers several advantages over traditional mold screening methods. Carpet dust acts as a reservoir for mold spores and is more representative of mold levels over time versus short-term air samples. The use of MSQPCR for this test allows for increased precision as it is based on a biochemical assay using calibrated instrumentation. Further research is being conducted and published that will link the ERMI assessing health risks for susceptible individuals. This information along with the national database will be invaluable in providing an objective and standardized method for screening homes for mold.
When Should I Use The ERMI Test?
The ERMI test can be used for evaluating "moldiness" in indoor environments. Molds are found in every home but not all molds are always present. The ERMI helps to make an assessment if a home is more or less likely to have "unhealthy" mold conditions. Especially residents sensitive to molds should consider using the ERMI to evaluate their indoor environment. Also home buyers can use this tool to predict if their new home is likely to have a history of water damage.Real Estate Transaction Mold Test : ****************************
550.00 to .......
Air Samples, between three and five, including outside control samples.
This tests for the presence of mold spores from chosen areas and may identify hidden sources and can give a baseline of contamination
information. We do NOT include a forensic visual evaluation: however we visual examine the property to determine the optimum testing locations.This should NOT be deemed a complete and comprehensive inspection that is needed to determine the source of the moisture, or the extent of the affected area of the structure. This fee also includes our data interpretation opinion of sample results.
Additional Laboratory Measurements:
Tape sample. Used to identify mold type95.00
Swab sample. Used to identify mold type95.00
Dust sample. Used to culture and ID past issues. It takes between 3 and 5 days.300.00
Comprehensive Radon Measurement:************************************
185.00
This is a computerized ( active and passive) radon measurement of all
needed testable areas. The lowest level and 1st. floor , with any additional slab or crawlspace foundations. Due to the variability of radon measurements, due to weather or occupancy habits, real time measurements are the most reliable.Remediation Consultation
This is a service that has been requested for many years from our clients where we will coordinate and oversee remediation effort.
Pricing will be based on the type of service required, for example
We will charge $195 for return visits to the property.
We will charge $125 per hour for phone consultation and coordination.
1325 Waterway Ct
Baltimore, MD 21226
ph: 410-360-7530
fax: 410-360-7530
alt: 410-360-6794
radondud
